{"id":10205698887,"title":"MakerBot - Specialty Filament - Flexible","handle":"makerbot-specialty-filament-flexible","description":"\u003cp\u003eMakerBot Flexible Filament for MakerBot Replicator 2 Desktop 3D Printers opens new potential for 3D prints, enabling functional hinges, joints, and shaped parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMakerBot Flexible Filament is a polyester-based filament with a low melting point that makes it easier to extrude\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeat your print with hot water to reshape and remold it; the form will set when cooled\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMakerBot Flexible Filament is nontoxic, does not absorb water, and is more tolerant of atmospheric humidity than MakerBot PLA Filament or MakerBot ABS Filament\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIAL DIRECTIONS FOR USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMakerBot Flexible Filament flows and melts at significantly lower temperatures than MakerBot PLA Filament. To avoid problems with the filament melting outside the extruder nozzle, it’s important to load and unload the MakerBot Flexible Filament at a lower temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e: Any time MakerBot Flexible Filament is loaded or unloaded and there isn’t any prior MakerBot PLA Filament to be purged, you must set the Change Filament temperature to 120°C.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003cbr\u003eMakerBot Replicator 2 Desktop 3D Printer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRIOR TO PRINTING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlease make sure to follow the specific load and unload directions listed in the description section.\u003c\/li\u003e\n\u003cli\u003eBe sure your build plate is level, clean, and oil-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTEMPERATURES\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eGlass Temp:\u003c\/strong\u003e 60°C (140°F)\u003cbr\u003e\u003cstrong\u003eMelting Temp:\u003c\/strong\u003e 58~60°C (136.4~140° F)\u003cbr\u003e\u003cstrong\u003eNozzle Temp:\u003c\/strong\u003e 100°C (212°F)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS AND WEIGHTS\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSpool Diameter:\u003c\/strong\u003e 20.32 cm (8 in)\u003cbr\u003e\u003cstrong\u003eSpool Width:\u003c\/strong\u003e 7.62 cm (3 in)\u003cbr\u003e\u003cstrong\u003eSpool Hub Hole:\u003c\/strong\u003e 5.08 cm (2 in)\u003cbr\u003e\u003cstrong\u003eFilament Diameter:\u003c\/strong\u003e 1.75 mm\u003cbr\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.36 kg (3 lb)\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1 kg (2.2 lb)\u003c\/p\u003e","published_at":"2017-04-21T15:12:11-04:00","created_at":"2017-04-21T15:14:33-04:00","vendor":"MakerBot","type":"Specialty Filament","tags":["Filament","Makerbot","specialty"],"price":19245,"price_min":19245,"price_max":19245,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42104128071,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MakerBot - Specialty Filament - Flexible","public_title":null,"options":["Default Title"],"price":19245,"weight":1361,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0407\/0913\/products\/3dprinting-matterthings-makerbot-filament-flexible.jpg?v=1492802075"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0407\/0913\/products\/3dprinting-matterthings-makerbot-filament-flexible.jpg?v=1492802075","options":["Title"],"content":"\u003cp\u003eMakerBot Flexible Filament for MakerBot Replicator 2 Desktop 3D Printers opens new potential for 3D prints, enabling functional hinges, joints, and shaped parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMakerBot Flexible Filament is a polyester-based filament with a low melting point that makes it easier to extrude\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeat your print with hot water to reshape and remold it; the form will set when cooled\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMakerBot Flexible Filament is nontoxic, does not absorb water, and is more tolerant of atmospheric humidity than MakerBot PLA Filament or MakerBot ABS Filament\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIAL DIRECTIONS FOR USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMakerBot Flexible Filament flows and melts at significantly lower temperatures than MakerBot PLA Filament. To avoid problems with the filament melting outside the extruder nozzle, it’s important to load and unload the MakerBot Flexible Filament at a lower temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e: Any time MakerBot Flexible Filament is loaded or unloaded and there isn’t any prior MakerBot PLA Filament to be purged, you must set the Change Filament temperature to 120°C.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003cbr\u003eMakerBot Replicator 2 Desktop 3D Printer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRIOR TO PRINTING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlease make sure to follow the specific load and unload directions listed in the description section.\u003c\/li\u003e\n\u003cli\u003eBe sure your build plate is level, clean, and oil-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTEMPERATURES\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eGlass Temp:\u003c\/strong\u003e 60°C (140°F)\u003cbr\u003e\u003cstrong\u003eMelting Temp:\u003c\/strong\u003e 58~60°C (136.4~140° F)\u003cbr\u003e\u003cstrong\u003eNozzle Temp:\u003c\/strong\u003e 100°C (212°F)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS AND WEIGHTS\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSpool Diameter:\u003c\/strong\u003e 20.32 cm (8 in)\u003cbr\u003e\u003cstrong\u003eSpool Width:\u003c\/strong\u003e 7.62 cm (3 in)\u003cbr\u003e\u003cstrong\u003eSpool Hub Hole:\u003c\/strong\u003e 5.08 cm (2 in)\u003cbr\u003e\u003cstrong\u003eFilament Diameter:\u003c\/strong\u003e 1.75 mm\u003cbr\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1.36 kg (3 lb)\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1 kg (2.2 lb)\u003c\/p\u003e"}

MakerBot - Specialty Filament - Flexible

Product Description

MakerBot Flexible Filament for MakerBot Replicator 2 Desktop 3D Printers opens new potential for 3D prints, enabling functional hinges, joints, and shaped parts.

KEY FEATURES

  • MakerBot Flexible Filament is a polyester-based filament with a low melting point that makes it easier to extrude

  • Heat your print with hot water to reshape and remold it; the form will set when cooled

  • MakerBot Flexible Filament is nontoxic, does not absorb water, and is more tolerant of atmospheric humidity than MakerBot PLA Filament or MakerBot ABS Filament

SPECIAL DIRECTIONS FOR USE

MakerBot Flexible Filament flows and melts at significantly lower temperatures than MakerBot PLA Filament. To avoid problems with the filament melting outside the extruder nozzle, it’s important to load and unload the MakerBot Flexible Filament at a lower temperature.

IMPORTANT: Any time MakerBot Flexible Filament is loaded or unloaded and there isn’t any prior MakerBot PLA Filament to be purged, you must set the Change Filament temperature to 120°C.

 

COMPATIBILITY
MakerBot Replicator 2 Desktop 3D Printer

PRIOR TO PRINTING

  • Please make sure to follow the specific load and unload directions listed in the description section.
  • Be sure your build plate is level, clean, and oil-free.

TEMPERATURES
Glass Temp: 60°C (140°F)
Melting Temp: 58~60°C (136.4~140° F)
Nozzle Temp: 100°C (212°F)

DIMENSIONS AND WEIGHTS
Spool Diameter: 20.32 cm (8 in)
Spool Width: 7.62 cm (3 in)
Spool Hub Hole: 5.08 cm (2 in)
Filament Diameter: 1.75 mm
Shipping Weight: 1.36 kg (3 lb)
Net Weight: 1 kg (2.2 lb)

$192.45
Maximum quantity available reached.