News — McGill Rocket Team

RSS

3D Printed Rocket Payload for the McGill Rocket Team 0

MatterThings 3D printed the payload for the McGill Rocket Team's rocket for their upcoming competition.  

McGill Rocket Team and Their Payload - L'équipe de fusillade de McGill et leur charge utile

McGill Rocket Team is an engineering team that includes more than 70 students representing four faculties at McGill: engineering, science, arts and management. The team enables students to study, design and build rockets while being truly dedicated to fostering an empowered, well-connected community that promotes interest in astronautics through competition and emphasizes a positive dynamic, strong work ethic and a passion for advancing the future of humanity.

Their project this year is to design and build a 10 ft. rocket to reach an altitude of 10,000 ft. above ground level, carrying a scientific payload. The payload is a solar powered glider that will be deployed from the rocket at apogee and start collecting data on its descent.

3D Printed McGill Rocket Payload - Cartable utile à la fusée imprimée 3D

MatterThings McGill Rocket Payload - MatterThings McGill Cartable utile

Although the McGill Rocket Team has been together for just one year, they have already completed the designs and are now in the construction phase of the rocket. The goal is to complete the rocket in time in order to represent McGill at the Experimental Sounding Rockets Association’ annual Intercollegiate Rocket Engineering Competition this June in Utah. This prestigious competition features university teams from around the world including the U.S., Canada, Brazil, India, and Turkey; and the McGill Rocket Team plans to soar above the competition with their entry.

McGill Rocket Team Students - Équipe de Fusillade des Étudiants de McGill

McGill Rocket Team Infographic - Infographique de l'Équipe de Fusillade de McGill

Rocket Payload and Bulk Mass - Charge utile et masse en vrac

Payload & Bulk Mass:
Payload: Solar powdered glider - collect atmospheric data: body was 3D printed using PLA plastic (4 in diameter; 6.5 in height)

Bulk Mass: Made of lead (Density: 0.41lb/in3); mass to make up payload mass required by competition. Volume: 14.63 in3.

Rocket Static Test #1:
McGill Rocket Team conducted a successful static test for Peregrine MU - 01 before launch at the international Intercollegiate Rocket Engineering Competition (IREC) 2015.


Rocket Tender Descender Test #1:
McGill Rocket Team conducted a successful main parachute deployment mechanism using a tender descender prior to launch at the international Intercollegiate Rocket Engineering Competition (IREC) 2015.

 

LIFT OFF! IREC 2015
The McGill Rocket Team presents you with their IREC 2015 competition highlight video. Peregrine MU-01 reached 12,650 ft. AGL with supersonic speed. Congratulations to all the teams for yet another amazing year of rocket science, launches, explosions but mostly learning.

 

 

MatterThings Inc. - 3D Printing
514-312-6060
www.matterthings.com
3d@matterthings.com

Faubourg de L’Île Shopping Centre
101 Boulevard Cardinal-Léger
Pincourt, Québec J7W 3Y3
Canada

1142, Rue Marie-Anne Est, Office #22
Montreal, Québec H2J 2B7
Canada

MatterThings 3D Printing Services Sponsors the McGill Rocket Team 0

McGill Rocket Team

MatterThings is sponsoring the McGill Rocket Team which has been putting so much effort into designing and building a 10 ft rocket with 10-lb scientific payload to launch to 10 000 ft. above ground level and represent McGill University at the prestigious international Intercollegiate Rocket Engineering Competition organized in Green River, Utah this June 2015.

McGill Rocket Team

The McGill Rocket Team will be unveiling their rocket on Wednesday June 17 and you are invited to come discover their project, support them and ask them your questions. Click here for more information.

PUBLIC EXHIBITION
Where: Lower Field
When: 11 am - 3pm
Bonus: FREE REDBULL courtesy of Red Bull 's Wings Team.

UNVEILING PRESENTATION
Where: Frank Dawson Adams Building, Room 5
When: 6 pm - 8 pm
Refreshments will be served.

So come with your friends and family, take some cool pictures with their rocket and celebrate with them in this unique initiative. 

McGill Rocket Team Group Picture

MatterThings Inc. - 3D Printing
514-312-6060
www.matterthings.com
3d@matterthings.com

Faubourg de L’Île Shopping Centre
101 Boulevard Cardinal-Léger
Pincourt, Québec J7W 3Y3
Canada

1142, Rue Marie-Anne Est, Office #22
Montreal, Québec H2J 2B7
Canada