3D Printed Robot for Cégep Gérald-Godin Student Project

RSS

3D Printed Robot for Cégep Gérald-Godin Student Project | Robot Imprimé en 3D pour Étudiant Cégep


A student studying microelectronics and robotics at Cégep Gérald-Godin in Sainte-Geneviève, Montreal, (Quebec) Canada built this robot named "Analysis Prime" using 3D printed parts built at MatterThings' 3D print shop. PLA (polylactic acid) a bio-plastic was used, which is derived from renewable resources - corn starch and resists solvents like acetone, gasoline, motor oil, etc.


The purpose of this robot is to measure signals at different points (connectors) of an electronic board platform (like the ones we usually find in electronic gadgets such as tv, radio, etc.).

3D Printed Robot for Cégep Gérald-Godin Student Project | Robot Imprimé en 3D pour Étudiant Cégep

3D Printed Robot for Cégep Gérald-Godin Student Project | Robot Imprimé en 3D pour Étudiant Cégep

MatterThings Inc. - 3D Printing
514-312-6060
www.matterthings.com
3d@matterthings.com

Faubourg de L’Île Shopping Centre
101 Boulevard Cardinal-Léger
Pincourt, Québec J7W 3Y3
Canada

1142, Rue Marie-Anne Est, Office #22
Montreal, Québec H2J 2B7
Canada

 

Previous Post Next Post

  • MatterThings Inc.
Comments 0
Leave a comment
Your Name:*
Email Address:*
Message: *

Please note: comments must be approved before they are published.

* Required Fields